Active next generation
Description
TYPES OF POWER SIZE IN KW * (ANG210)
ANG 210 – 01 | 1 0.25
ANG 210-03 1 0.37
ANG 210-05 1 0.55
ANG 210 – 07 | 1 0.75
210 – 09 | 1 1.1
ANG 210 – 11 | 2 1.5
ANG 210 – 13 | 2 2.2
ANG 210 – 15 | 2 3
ANG 210 – 18 | 3 4
ANG 210 – 19 | 3 5.5
ANG 210 – 21 | 4 7.5
ANG 210 – 22 | 4 9.2
TYPES OF POWER SIZE IN KW * (ANG410)
ANG 410 – 01 | 1 0.25
ANG 410 – 03 | 1 0.37
ANG 410 – 05 | 1 0.55
ANG 410 – 07 | 1 0.75
ANG 410 – 09 | 1 1.1
ANG 410 – 11 | 1 1.5
ANG 410 – 12 | 2 1.85
ANG 410 – 13 | 2 2.2
ANG 410 – 15 | 2 3
ANG 410 – 18 | 2 4
ANG 410 – 19 | 3 5.5
ANG 410 – 21 | 3 7.5
ANG 410 – 22 | 3 9.2
ANG 410 – 23 | 4 11
ANG 410 – 25 | 4 15
ANG 410 – 27 | 5 18.5
ANG 410 – 29 | 5 22
ANG 410 – 31 | 5 30
ANG 410 – 33 | 6 37
ANG 410-35 | 6 45
ANG 410-37 6 55
ANG 410 – 39 | 6 65
ANG 410 – 43 | 7 75
ANG 410-45 7 90
ANG 410 – 47 | 7 110
ANG 410 – 49 | 7 132
ANG 410 – 51 | 8 160
ANG 410 – 53 | 8,200
ANG 410 – 55 | 8,250
ANG 410 – 57 | 8,315
ANG 410 – 59 | 8,355
ANG 410 – 61 | 8,400
TYPES OF POWER SIZE IN KW * (ANG510)
ANG 510 – 51 | 8 160
ANG 510 – 53 | 8,200
ANG 510 – 55 | 8,250
ANG 510-57 | 8,315
ANG 510 – 59 | 8,355
ANG 510-61 8,400
TYPES OF POWER SIZE IN KW * (ANG610)
ANG 610 – 51 | 8 160
ANG 610 – 53 | 8,200
ANG 610 – 55 | 8,250
ANG 610 – 57 | 8,315
ANG 610 – 59 | 8,355
ANG 610 – 61 | 8,400
Main options
Optional keyboard for easy setup, commissioning, parameterization, copy function and diagnostics
• KP500: Detachable keyboard
• KPCMK: Cabinet mounting kit and keyboard pocket
Optional interface for communication with a PC
• KP232: Hot-pluggable serial communication interface recommended for service personnel
• ISO-USB: USB-Serial adapter, galvanically isolated
Variants Automation interface
• EM-AUT-01: Evaluation of EtherCAT® and Encoder (TTL, HTL, Resolver, Hiperface, EnDat 2.1)
• EM-AUT-04: Evaluation of EtherCAT® and encoder (HTL, Resolver)
• EM-AUT-11: Evaluation of PROFINET and Encoder (TTL, HTL, Resolver, Hiperface, EnDat 2.1)
• EM-AUT-21: Evaluation of Ethernet / IP and Encoder (TTL, HTL, Resolver, Hiperface, EnDat 2.1)
• EM-AUT-31: Evaluation of Varan and Encoder (TTL, HTL, Resolver, Hiperface, EnDat 2.1)
Optional PC software
• VPlus for Windows with settings, terminal monitor
• Actual value window
• Range function
• Saving parameters
Accessories:
• Braking resistors type BR: Braking resistors offer an inexpensive solution to the dissipation of generator power that occurs during deceleration. The thermal sensor of the brake resistor protects the resistor from overheating.
• Line chokes Type LCVS & LCVT: Line choke types LCVS (for single-phase phase installation) and LCVT (for three-phase phase installation) increase the surge protection of the inverter and increase the EMC of the system.
• Mains filters Type FTV: Depending on the limits of the application, certain EMC levels must be achieved. Network filters are a component to improve the EMC behavior of a machine installation.
Degree of protection
IP20 (EN 60529)
Certification
UL508C
STO (EN13849 / EN 61508)
Power supply and power range
ANG410: 0.25 – 400 kW / three-phase 360 - 480V / 50 – 60 Hz (± 10%)
Parallel connection up to 1200 kW
ANG210: 0.25 – 9.2 kW / single-phase or three-phase 200 – 240V / 50 – 60 Hz (± 10%)
ANG510: 160 – 400 kW / three-phase 525V / 50 – 60 Hz (± 10%)
Parallel connection up to 1200 kW
ANG610: 160 – 400 kW / three-phase 690V / 50 – 60 Hz (± 10%)
Parallel connection up to 1200 kW
Control of asynchronous and synchronous motors.
Control methods:
• V / f
• Field-oriented control with encoder
• On-site control without a sensor
Overload capacity:
• 100% continuous output
• up to 150% for 60 seconds
• up to 200% for 1 s
Switching frequencies 2,4,8,12,16 kHz (availability depends on the size of the power supply)
EMC filter integrated up to 9.2 kW (EN61800-3)
Software features
Main functions of the software
• Positioning function via bus (Motion Control compatible with CiA DS402)
• Turntable control
• Master / Slave function with electronic transmission
• Power failure regulation
• Feature for lifting, crane and winch applications
• Spindle control
• Feed function for winders
• Programmable channel of reference values
• Programmable start and stop characteristics
• Motor potentiometer
• Programmable S curve
• 4 data sets
• Automatic commissioning and commissioning
• Automatic reset after failure
• Automatic start after power failure
• PI controller
• Volume flow regulation
• Crack-free torque / speed switching
• Mechanical brake control without friction
• Index management
• Intelligent current limits
• Comprehensive monitoring and protection options
• High-speed control
• 3 different brake control functions
Hardware features
Integrated safe torque off function (STO SIL 3 / PL e)
• External 24Vdc power supply
• Integrated dynamic brake module
• Connection via intermediate circuit
• Various feedback sensors
• Encoder interface for Resolver
• Cubic interp
Download PDF
